top of page
APC Back-UPS 700VA, 230V, AVR, Australian Sockets

APC Back-UPS 700VA, 230V, AVR, Australian Sockets

$169.99Price
•Audible alarms
•Provides notification of changing utility power and UPS power conditions
•Automatic Voltage Regulation (AVR)
•Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
•LED Indicators
•Provide easy-to-read status of the unit and utility power conditions.
•Telephone dataline surge protection
•Provides protection of connected equipment from power surges traveling on telephone lines.
•USB connection
•Use your PC to access additional power protection and management features for your UPS via a USB Port.
•Back-UPSFeatures & Benefits
•Safety
•Safety-agency approved
•Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
•Marketing Features
•Battery-protected and surge-only outlets
•Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
•Protection
•Surge only outlets
•Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
•Battery and surge protected outlets
•Back up and protect your hardware and data during power outages, surges and spikes.
•Availability
•Intelligent battery management
•Maximizes battery performance, life, and reliability through intelligent, precision charging.
•Automatic self-test
•Periodic battery self-test ensures early detection of a battery that needs to be replaced.
•Battery failure notification
•Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Details

    •Output
    •Output power capacity
    •390Watts / 700VA
    •Max Configurable Power (Watts)
    •390Watts / 700VA
    •Nominal Output Voltage
    •230V
    •Output Frequency (sync to mains)
    •50/60Hz +/- 3 Hz
    •Output Frequency (not synced)
    •50/60 Hz +/-1 Hz
    •Topology
    •Line Interactive
    •Waveform type
    •Stepped approximation to a sinewave
    •Output Connections
    •(3) Australian (Battery Backup)
    •Transfer Time
    •4ms typical : 6ms maximum
    •Input
    •Nominal Input Voltage
    •230V
    •Input frequency
    •50 Hz +/- 3 Hz
    •Input Connections
    •Australian/Chinese
    •Cord Length
    •1.22meters
    •Input voltage range for main operations
    •140 - 300V
    •Number of Power Cords
    •1
    •Type of Input Protection Required
    •3-pole breaker
    •Input Power Factor at Full Load
    •0.56
    •Batteries & Runtime
    •Battery type
    •Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
    •Typical recharge time
    •6hour(s)
    •Battery Volt-Amp-Hour Capacity
    •81
    •Communications & Management
    •Interface Port(s)
    •USB
    •Control panel
    •LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators
    •Audible Alarm
    •Alarm when on battery : distinctive low battery alarm : configurable delays
    •Surge Protection and Filtering
    •Surge energy rating
    •273Joules
    •Data Line Protection
    •RJ-11 Modem/Fax protection
    •Physical
    •Maximum Height
    •200mm , 20.0cm
    •Maximum Width
    •115mm , 11.5cm
    •Maximum Depth
    •256mm , 25.6cm
    •Net Weight
    •6.0kg
    •Shipping weight
    •6.4kg
    •Environmental
    •Audible noise at 1 meter from surface of unit
    •45.0dBA
    •Conformance
    •Standard warranty
    •2 years repair or replace
bottom of page